Job Listings

We are looking for a permanent Apprentice AME with the following qualifications:

  • Shall have successfully completed a Transport Canada-approved basic aircraft maintenance training course;
  • Apprentice engineer with 1 year of experience on Bell 206 and/or AS350 will be considered an asset;

This position requires a minimum of 5-10 years of experience in aircraft inspections, troubleshooting and repairing single and multi-engine, fixed wing aircraft in a flight school environment. Bachelor#8217;s Degree is not required, but preferred. Licensed A & P and IA is required, Inspection Authorization strongly recommended and 2-5 years of avionics experience essential.

Job SummaryThe Aircraft Mechanic II (Power Plant) is required to maintain and service the applicable aircraft engines and related systems/components as required in support of the program in accordance with applicable publications and governing instructions.Principle AccountabilitiesServices, repairs and overhauls aircraft to ensure airworthiness.

Position Summary This role is responsible for inspecting, repairing, modifying, and updating aircraft systems such as sheet metal, electrical, engines, propellers, hydraulic, flight controls and other systems. Reasonable Accommodations StatementTo perform this job successfully, an individual must be able to perform each essential duty listed below satisfactorily.

Position Summary This role is responsible for the supervising, mentoring and leading a group of avionics technicians during troubleshooting, inspecting, repairing, modifying, and updating aircraft systems. Reasonable Accommodations StatementTo perform this job successfully, an individual must be able to perform each essential duty listed below satisfactorily.

Position Summary This Senior Level technician role is responsible for supervising, mentoring and leading a group of sheetmetal technicians during, inspecting, repairing, modifying, and updating aircraft structures including primary, secondary and tertiary structures, frames, skins, flight controls, cowlings, doors, antenna mounts, doublers, special mission structures, etc.

Position SummaryThis Senior Level technician role is responsible for supervising, mentoring and leading a group of technicians during troubleshooting, inspecting, repairing, modifying, and updating aircraft systems such as sheet metal, electrical, propellers, engines, hydraulic and other systems as required.Reasonable Accommodations StatementTo perform this job successfully, an individual must

Position Summary: The Department of Aviation Sciences, College of Aviation, Western Michigan University in Battle Creek, Michigan, invites applications for a full-time Faculty Specialist 1/2/Master - Lecturer, one-year term renewable, in Aviation Sciences.Responsibilities: The successful candidate will teach undergraduate aviation courses primarily in the FAR Part 147 maintenance program, and/

LAMEs x 2 Wanted Helicopter (Nadi, Fiji) & Fixed Wing (Christchurch, NZ) GCH Aviation have vacancies in two of the most beautiful parts of the world #8211; Fiji and New Zealand.

Glasair Aviation produces modern, innovative composite aircraft for personal use. It is the world#8217;s leader in assisting customers with the assembly of their aircraft, focusing on education, recreation and safety. As part of the next stage of our growth, we are now seeking a high energy, fast learning Sheet Metal Assembly Mechanic to join our team.

As part of the next stage of our growth, we are now seeking an AIRCRAFT MECHANIC A&P to join our team. The successful candidate will be responsible for assisting customers with assembly of their aircraft at our Certified Aircraft Assembly Center.

As part of the next stage of our growth, we are now seeking an AIRCRAFT ASSEMBLY MECHANIC to join our team. The successful candidate will be added to a team of mechanics responsible for the assembly of various stages of a general aviation aircraft.

Air Bear Aviation is hiring licensed A&P Mechanics with line maintenance experience to be a part of our growing airline operations at Boston Logan International Airport (BOS). Line maintenance technicians troubleshoot and repair commercial aircraft in accordance with requirements established by the company, applicable government agencies, and aircraft manufacturers.

Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.

Summary:Perform inspections of aerospace mechanical and electronics systems and subsystems.Experience with inspection/fabrication of electro-mechanical assemblies, cable harness assemblies and soldering of electrical/electronic assemblies.Minimum 5 years of experience in electronics/harness assembly/inspection activities.Trained to the following industry standards: IPC-A-620 or equivalent and J

Company has immediate openings for Airframe and Powerplant (A&P) IA Mechanics at locations in the Western and Central Pacific. Missions are planned and flown in accordance with air tasking orders received. Company will provide required training for the mission and aircraft operations.

Busy San Fernando Valley FBO on Whiteman Airport seeks experienced A&P mechanic with general aviation experience. Must have experience on piston engines. Job includes 50hr, 100hr, and annual inspections plus regular aircraft maintenance including SEB's, and AD's.

Duration 6 MONTHSDescriptionChipton-Ross is seeking a Production Coordinator A located in North Charleston, SC RESPONSIBILITIES:Assists with processing and movement of production and other materials into and out of storage, production and other locations to support the flow of production following standard work instructions. Assists in monitoring work in process.

M2 Services Corporation's mission is to be the preferred provider of professional and technical services, logistics, security and facility support services to Government agencies and large business partners.

Description: This position is responsible for performing routine maintenance, and major inspections on turbofan and turboprop powered aircraft. Trouble-shooting, repair, and modification of aircraft components is accomplished by this position.

BOMBARDIER At Bombardier, our employees work together to evolve mobility worldwide - one good idea at a time. If you have a good idea, we#8217;ll provide the environment where it will thrive and grow into a great product or customer experience. Your ideas are our fuel.

Quality Inspector #8211; Wichita, KS
6 Months Contract (Extensions possible)
$50/hr (50/50 Per Diem split, and $110 additional per
diem/week)
Shifts
Available:
Friday to
Sunday - 6:00AM to 6:00PM
Friday to
Sunday - 6:00PM to 6:00AM
Saturday
to Monday - 6:00AM to 6:00PM

Must be authorized to work in the United States. This position is responsible for the technical guidance, coordination and delegation of assignments to technicians assigned to the aircraft. Serves in lieu of the Crew Chief during his absences.• Helps crew members improve their skills, builds trust and promotes teamwork with the maintenance crew(s).

Must be authorized to work in the United States. Works under the supervision of test cell supervisor to prepare engines for test, perform all tests as per the EMM and prepare engine for shipping after test. Perform necessary maintenance in the test cell to correct any discrepancies found during test.Perform maintenance on engines in engine shop as required.

We have an opportunity in Nashville, TN to work on corporate aircraft! Call 817-847-6673 or submit your resume!

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901