Job Listings

Job Description:Candidates will be Repairing and installing avionics systems on corporate jet aircraft.

Client is looking for an electrical solderer assembler with 1-2 years of aircraft assembly, wire harness, and soldering experience on electronic boards.This position requires the candidate to connect the wiring to the avionic boards prior to installation onto the corporate jet aircraft.

Job Description:The Product Repair Technician performs inspections, tests, troubleshoots, and repairs on customer returned equipment. Provides an efficient and effective repair service on Oxygen components for commercial aircraft.

Job Description:A&P Mechanic:Performs airframe, powerplant and propeller repairs and modifications on corporate jet aircraft.Removal and disassembly of defective parts; assembly and installation of replacement parts; and testing aircraft systems.Performs routine inspections and troubleshooting, including airframe structures, engines, and aircraft systems using approved or accepted data issu

Job Description:Non-Destructive Test Inspector:Perform NDT inspections on aircraft landing gear parts in compliance with customer work instructions.Will be required to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection, and document resultsconduct system performance checks in accordance with the applicable process standard.

Our client is currently seeking Aircraft Mechanics/A&P Mechanics to support their the LSFMA L2G contract and the Dept of State FMS program 1. L2G which is an Air Force conversion from the UH-60 L model to the G Model and 2.

Our client was just awarded the ALICE program which is a NASA program providing scheduled/unscheduled maintenance and Phase Inspections on C-130, P-3, and King Air aircraft. They are currently transitioning the program and have to have it completely stood up by Oct 1. This is a long term, direct position. Work Environment:

Our high profiled client is currently seeking Avionics Technicians to support a long term military contract working on Blackhawk (UH-60) helicopters. These are long term/indefinite contracts with the realistic potential to go direct. Qualification:

Our client is currently seeking several Structural Installers/Mechanics to support their the LSFMA L2G contract and the Dept. of State FMS program 1. L2G which is an Air Force conversion from the UH-60 L model to the G Model and 2. Dept of State FMS- phase maintenance and reset on UH-60s (and AH-1s) for the Columbian, Afghanistan, and Jordanian governments.

  • Must have high school diploma/GED
  • Must have 2 years of NDT inspection experience in aerospace/aviation industry
  • NDT FPI Level II Certification must be NAS 410 Certified
  • Must be flexible with shift (1st or 2nd shift)
  • Contract to direct position
  • Must have A&P license
  • Must have tools (etched, shadowed and inventory list)
  • Must be flexible with shift
  • Pay will be based on corporate A&P maintenance experience

Minimum Requirements

  • Must have High School Diploma/GED
  • Minimum of 1 year of composite technician experience or
  • Current student of Aviation Technical School
  • Must be flexible on shift

A&P Mechanic Wanted!Candidates needed for performing maintenance, preventative maintenance, hourly inspections, and testing and troubleshooting of aircraft issues on Cessna 208 Caravans.Benefits:-Per diem split -Ability to travel to Florida to work for the winter months from October - April, before coming back to CT in May.-Ability to work on floatplanes (working on Cessna 208s.) Requiremen

A&P Mechanics will be responsible for performing scheduled and unscheduled maintenance on corporate aircraft including but not limited to: challenger, lear and global express.Candidates will be working in an indoor, clean, corporate business jet repair facility. There are two hangers, one covers the challenger, the other covers globals and lears.

FAA Repair Station is seeking a Material Finisher/GrinderRelatively new company, founded in 2007. They provide repair and overhaul of aircraft components, mainly Pratt and Whitney.

GSE (Ground Support Equipment) Technician will be responsible for performing preventative maintenance repairs on GSE (Ground Support Equipment) such as baggage carts, etc.GSE Technicians will be responsible for the following:-Perform light & Heavy repairs on GSE equipment-Diagnose engine mechanical issues and repair ( Diesel, gas and LP) -Troubleshoot A/C and D/C electrical systems -Ability

Position: Aircraft Tech TraineeUnder direct supervision of the Mechanical Team Lead or Senior Tech, assist with the inspection, maintenance and repair of customer aircraft.

A&P Mechanic - Corporate JetsTitle: Aircraft MechanicLocation: Mesa, AZDuration: 6 month contract to permanent hire Note: Permanent hire is highly encouraged but not requiredCompensation: $25 - 32/hr depending on experienceStart Date: ASAPInterviews: By phone, interview with DOMJob Description:Aerotek is seeking to hire a full-time aircraft mechanic for a job opportunity in Mesa, AZ

Client is looking for an electrical solderer and a composite assembler with 1-2 years of aircraft assembly, wire harness, and soldering experience on electronic boards.This position requires the candidate to connect the wiring to the avionic boards prior to installation onto the corporate jet aircraft.

Looking for an avionics technician or installer for planned maintenance. On a day to day basis candidates will be responsible for performing avionics line testing, troubleshooting, repairs, operational checks, ordering of parts, and inspections of avionics systems. They must have 3-5 yrs. experience on corporate aircraft. They will prefer Lear, Challengers or Global Express.

*Aviation Company will be conducting heavy sheet metal maintenance on ERJ 145, 170, and 190 aircraft; Aviation Company will consider candidates from both a rotary wing or fixed wing background as long as they have worked on "live" aircraft and have heavy depot level repair experience or modification experience; With that being said, the strongly prefer commercial fixed wing experience.

A helicopter repair facility in Philadelphia, PA is hiring for immediate openings for Helicopter Airframe and Powerplant (A&P) Technicians

Aerotek is hiring Aircraft Avionics Installer's for commercial aircraft programs in Philadelphia, PA.

Aerotek is hiring Aircraft Sheet-metal & Structural mechanic's for contract opportunities performing aircraft structural assembly in Philadelphia, PA.

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901