Job Listings

Job Qualifications: A&P Mechanic experienced working in a prototype environment doing aircraft fabrication and assembly. Capable of reading and understanding drawings and schmatics. Also capable of working from sketches and verbal instructions. Experienced in metal and carbon fiber fabrication and assembly. Candidate will also have experience working/testing engines/motors for aircraft.

Overview:At APS, we help pilots bring everyone home safely. We don#8217;t just say that; it is our primary focus every day. We are an ambitious team on a mission to change flight training for the better, worldwide. To be upfront, APS is not for everyone. We hold ourselves to a higher standard than most.

Avionics Mechanic HQ Aero is currently recruiting for CTH Avionic Technicians for one of our customers in Washington, PA Requirements:2 years Avionics Install experience is required. Installation of Garmin/Avidyne Gear in a King-Air.

Position Status: Full Time Location: Northwest, Other - Alliance AirportDepartment: NW Bus Tech & TransportationJob SummaryResponsible for assisting with instructional tasks in a laboratory setting to assist the teaching staff.Essential Duties and Responsibilities

Saint Louis,Missouri,United States
GBA4N2
The F-15 Logistics Support Analysis (LSA) team requires an entry level Systems Support Technologist. This is a Maintenance Logistics Analyst role.System Support Analysis (Non - IT position).Position Responsibilities:

Aviall, a Boeing Company is a leading solutions provider of aftermarket supply-chain management services for the aerospace and defense industries and is the largest subsidiary of The Boeing Company.

Aviall, a Boeing Company is the world's largest provider of new aviation parts and related aftermarket services. Aviall markets and distributes products for more than 240 manufacturers and offers approximately 2,000,000 catalog items from 40 customer service centers located in North America, Europe, and Asia-Pacific.

Chantilly,Virginia,United States
8AANNC

Everett,Washington,United States
JACUN5

Fort Walton Beach,Florida,United States
GGE1P4

Location:RAAF Base WilliamtownCategory:Engineering / TechnicalPosition Type:PermanentJob Reference:BOE/1339161E1339161 6B.1B.622.

Everett,Washington,United States
21203

Sky Quest Aviation LLC is currently seeking an A&P/IA mechanic with primary experience on Cessna piston and turbo prop (Cessna 172 to 208B Grand Caravan) aircraft. Candidate should also possess some single engine Bell helicopter experience.

Ops Trainee Needed in Savannah, GA
Only qualified candidates with the below experience will be considered for this position.

Position: Inspector - Ardmore, OKJob Description: Inspector needed in Ardmore, OK
Only qualified candidates with the below experience will be considered for this position.
Job Requirements:

Hydraulic Fabricator II Needed in Savannah, GA
Only qualified candidates with the below experience will be considered for this position.

Unique Skills:Solumina, Smart Team and SAP preferred.

Hydraulic Fabricator I Needed in Savannah, GA
Only qualified candidates with the below experience will be considered for this position.

Unique Skills:Unique skills: Required Solumina, Smart Team and SAP preferred.
Position Purpose:Fabricate fluid transfer lines/tubing and/or hydraulic parts to support the next assembly areas. Ensure quality standards are maintained.

Final Mech II Needed in Savannah, GA
Only qualified candidates with the below experience will be considered for this position.

Final Line Mech I Needed in Savannah, GA
Only qualified candidates with the below experience will be considered for this position.

Position Title:
Aircraft Electrical Installer A #8211;Bloomfield, CT
Aircraft Electrical Installer A - Needed in Bloomfield, CT
Only qualified candidates with the below experience will be considered for this position.
Job Description & Requirements:

Contractor Tooling/Fabricator Needed in Pinellas Park, FLOnly qualified candidates with the below experience will be considered for this position.2nd ShiftSkills Requirement for Position:· Lays out, fabricates tool for detail parts as well as assembles and machine tool fixtures by analyzing blueprints, sketches, models, and engineering or shop specifications.· Uses a variety of machinist's hand

CNC Operator Needed in Lewisville, TX
Only qualified candidates with the below experience will be considered for this position.
Job Description & Requirements:

  • Must be able to program and run MultiCam 5000 router
  • Must be able to read drawings and able to use AutoCAD.

Aviation Personnel currently offers:

CNC Machinist Needed in Savannah, GA
Only qualified candidates with the below experience will be considered for this position.

Position: Bench Structures Mechanic - Little Rock, ARJob Description: Bench Structures Mechanic needed in Little Rock, AROnly qualified candidates with the below experience will be considered for this position.
Build aircraft parts, sub-assemblies and assemblies using blueprints, CATIA models, company standards and/or work instructions.
Job Requirements:

Avionics/Elec Tech Sr. Needed in Savannah, GA
Only qualified candidates with the below experience will be considered for this position.

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901